WG Series Pneumatic Winches (Legacy Models)
The Columbia WG Series pneumatic winches have delivered outstanding pulling capacity for numerous applications over the years, with specific models rated to pull up to 10,000 pounds on a single line while reaching maximum speeds proportional to air flow and pressure. These compact, lightweight units have been valued for their ability to maximize workspace efficiency while providing reliable performance in hazardous or demanding environments.
Legacy Support Available
Allied Power Products remains committed to supporting our pneumatic WG Series winches currently in operation. Our team provides:
- Maintenance support and troubleshooting
- Replacement parts when available
- Technical documentation
For New Installations
The performance capabilities of the pneumatic WG Series have been enhanced in our advanced W2G and W2K Series pneumatic winches, which represent the evolution of our pulling technology. These new series build upon the proven design principles while incorporating improved features and performance specifications. We recommend either the W2G or W2K Series for all new pneumatic applications, depending on your specific requirements:
Explore the W2G Series Pneumatic Winches →
Explore the W2K Series Pneumatic Winches →
Need assistance with your existing pneumatic WG Series winch?
Our team is ready to help ensure your legacy equipment continues to perform reliably. Contact our service department for technical support, parts information, or to discuss upgrade options.
Allied Power Products has specialized in providing winches, hoists, capstans, and cranes to meet specific application requirements for more than 40 years. Whether supporting legacy equipment or designing new solutions, our commitment to customer satisfaction remains unwavering.
Features
- Rated for pulling on slopes up to 30%
- Dependable vane motor
- Totally enclosed geartrain
- Automatic braking system
- Three stage planetary reduction
- Simple installation at any angle
- Pneumatic control options
Questions?
| Model | HP | Power Input | Gear Ratio | Calculated Performance | ||||||
| First Layer | Mean Drum | Full Drum | ||||||||
| PSI | SCFM | LBS | FPM | LBS | FPM | LBS | FPM | |||
| WG750-P | 4.25 | 65 | 110 | 36:1 | 750 | 95.4 | 562 | 123.8 | 457 | 152.1 |
| WG1600-P | 6.5 | 75 | 190 | 36:1 | 1,600 | 95.4 | 1,206 | 123.8 | 981 | 152.1 |
| WG2750-P | 2.5 | 70 | 75 | 261:1 | 2,750 | 17.6 | 2,190 | 22.8 | 1,782 | 28.0 |
| WG5000-P | 4.25 | 65 | 110 | 261:1 | 5,000 | 13.2 | 3,910 | 17.1 | 3,182 | 21.0 |
| WG10000-P | 6.5 | 75 | 190 | 261:1 | 10,000 | 13.0 | 7,170 | 17.0 | 6,270 | 21.0 |
Performance based on intermittent duty cycles
| Drum Size | Typical Weight | Wire Rope Capacity | ||||
| 2.5 HP | 4.25 HP | 6.5 HP | 1/4″ | 5/16″ | 3/8″ | |
| -01 | 86 lbs. | 96 lbs. | 104 lbs. | 326′ | 228′ | 159′ |
| -02 | 89 lbs. | 99 lbs. | 107 lbs. | 407′ | 285′ | 198′ |
| -03 | 99 lbs. | 109 lbs. | 117 lbs. | 509′ | 356′ | 248′ |
| Model | Drum | DXF | STP | |
|---|---|---|---|---|
| WG750-P | -01 | DXF | STP | |
| WG750-P | -02 | DXF | STP | |
| WG750-P | -03 | DXF | STP | |
| WG1600-P | -01 | DXF | STP | |
| WG1600-P | -02 | DXF | STP | |
| WG1600-P | -03 | DXF | STP | |
| WG2750-P | -01 | DXF | STP | |
| WG2750-P | -02 | DXF | STP | |
| WG2750-P | -03 | DXF | STP | |
| WG5000-P | -01 | DXF | STP | |
| WG5000-P | -02 | DXF | STP | |
| WG5000-P | -03 | DXF | STP | |
| WG10000-P | -01 | DXF | STP | |
| WG10000-P | -02 | DXF | STP | |
| WG10000-P | -03 | DXF | STP |
Click here for guidelines on selecting a model number.
This information is provided for reference only. All information subject to change without notice.