Tractor systems

Tractor Winch Packages for Dozers

Hydraulic winch packages that bolt to the back of your dozer and run on its own hydraulics. One drum for recovery and pipeline work, or two to four drums for line sagging. Each one is engineered to the specific tractor and shipped ready for your dealer or shop to install.

Drums
1 to 4
Pull per drum
to 60,000 lbs
Power
Tractor hydraulics
Mounting
Existing bolt holes

Tractor package Three-winch mounting weldment for a dozer10 photos

One engineered package, built around your machine

Whatever the job, every package covers everything between the tractor’s hydraulics and the wire rope.

Mounting weldment

Designed to the rear face or ripper mount, on existing bolt holes. You field-verify our approval drawing before we build.

Hydraulic manifolds

Winch selector with brake drain, pressure and flow regulation, plus a freespool manifold.

Controls

Stainless 24 VDC enclosure. In and out from the existing in-cab ripper control.

Cable tensioners

Tension plate kit on each drum, so rope spools tight even when it pays out light.

Four yellow cable tensioner rollers with bronze bushings laid out on a shop bench
Cable tensioner rollers, inspected before shipping.

Three ways to configure it

The same mounting and hydraulics carry one drum or four. A crew that bought a recovery winch can sag line with the same tractor, and the reverse.

1 drum

Single-drum packages

One tail-mounted hydraulic winch for the jobs a dozer gets called to.

  • Recovery, including pulling the tractor itself out when it’s stuck
  • Pipeline work: pulling pipe, skidding and positioning
  • Single-line sagging for one conductor at a time
  • Roller fairlead and hydrostatic drive options

2, 3 or 4 drums

Line-sagging packages

Independent drums for sagging several conductors at once.

Your winches

Retrofit packages

Already own the winches? We build the rest around them.

  • New mounting weldment for the tractor
  • Selector manifold and controls
  • Upgraded cable tensioners
  • Paint refresh on customer winches on request

Line-sagging packages

How a three-drum sagging package goes together

Sagging conductor to spec means pulling and paying out line in small, controlled increments, often on several lines at once, from a machine that also has to travel the right-of-way.

On the tractor
Hydraulic supply + in-cab ripper switch
Ripper switch drives in and out for every drum.
APPI hydraulics
Winch selector manifold
Brake drain circuit, pressure and flow regulation for all drums.
Freespool manifold
Pressure reduction and freespool control.
APPI winch package
Drum 1
Drum 2
Drum 3
Two-speed hydraulic winches with tensioner kits, on one mounting weldment.
Stainless 24 VDC control center: per-drum HIGH/LOW speed, freespool ON/OFF and enable switches, with indicator lights.
Usually by your dealer or shop: installation, hydraulic hoses, fittings and cooler, and electrical connections. Hoses and installation can be quoted as add-ons.
Typical sagging configuration
WinchesTwo to four hydraulic, two-speed planetary winches, up to 60,000 lbs first-layer pull each.
RopeSupplied loose to your spec, for example 7/8" × 275 ft or 5/8" × 600 ft per drum, with latching hooks.
OperationDrums run alone or in any combination. When several run together, speed and pull share the tractor’s flow and follow the load.
Not includedInstallation, hoses, fittings and cooler, brackets for the manifolds and enclosure, electrical connections. Ask about add-ons.

Machines we’ve built packages for

Each mount is designed to the specific machine. Don’t see yours? Send the make, model and serial.

Caterpillar

D5D6D6ND8

Komatsu

D71PX-24D85EX-18

John Deere

850K950K1050K

Case

1150M

What we need to quote

With the tractor make and model we can give you a rough-order-of-magnitude price quickly. The serial number and mounting details get you an exact one.

Start a tractor package quote
  1. Tractor make, model, year and serial
    e.g. Cat D6, Komatsu D85EX-18, John Deere 1050K
  2. What the winch will do
    Recovery, pipeline, single-line or multi-line sagging
  3. Number of drums
    One to four
  4. Line pull and speed per drum
    And whether drums run together
  5. Mounting location
    Rear face or ripper mount; the OEM drawing helps
  6. Rope size and length
    Wire rope or synthetic
  7. Hydraulic flow and pressure available
    From the tractor’s spec sheet
  8. New winches or retrofit, and who installs
    Dealer, your shop, or us

Recent work

All Solution Spotlight stories →
Solution Spotlight · Line sagging

Three-drum hydraulic line-sagging package for a D8-size dozer

Three independent 60,000 lbs drums, 275 ft of 7/8" rope each, custom tensioning plates and a D8 mounting bracket, all on the dozer’s hydraulics.

Read the story →
2026 · through an equipment dealer

Two three-drum sagging systems for Komatsu D85EX-18 dozers

Rear-face weldments on existing bolt holes, stainless 24 VDC controls, selector and freespool manifolds, 5/8" × 600 ft rope. The weldment is pictured at the top of this page.

Allied skid-mounted recovery winch covered in snow at a British Columbia job site
Solution Spotlight · Recovery

200,000 lbs recovery winches for side-boom crawler tractors

Two skid-mounted electric winches pull heavy equipment up 50% grades in British Columbia, from −40 °F to +60 °F.

Read the story →

Questions we get

Do we have to modify the dozer?

No. The weldment is designed to the tractor’s existing rear-face or ripper bolt pattern. You verify our approval drawing against the machine before we build.

Can a single-drum package be used for sagging?

Yes, for one conductor at a time. If you sag several lines regularly, a two- to four-drum package on the same machine saves passes.

Can all the drums run at once?

Yes, in any combination. When several run together, speed and pull share the tractor’s hydraulic flow and follow the load.

Can you use the winches we already have?

Usually. We build the mounting, hydraulics, controls and tensioners around customer-supplied winches.

Who installs the package?

Most packages are installed by the equipment dealer or the contractor’s shop. Installation and hoses can be quoted separately.

How fast can we get a price?

A rough-order-of-magnitude price needs only the tractor make and model. Exact pricing follows once we have the serial number and mounting details.

Related
Cable tensioners Hydraulic winches Pipe bursting Logging yarders & loaders

Quote a tractor package

Send the tractor make and model and what it needs to do. We’ll come back with a price range.

Request a quote