Products · Custom Solutions

Custom Winch & Hoist Manufacturer

Standard equipment doesn’t always fit a specialized application. As a custom winch and hoist manufacturer, we design and build Columbia units around your load, space, power and environment when a catalog unit won’t do the job. Engineered and built to order in Beaverton, Oregon since 1983.

Standard line pull
470 – 64,000 lbs
Line speed
to 55.7 FPM
Motors
½ – 60 HP
Wire rope
3/16" – 1-1/4"

Custom Custom AC electric winch10 photos

Built and shipped, not catalog ratings

What we’ve actually built

Every figure below comes from a custom job we engineered, built in Beaverton and shipped, and every one links to the write-up. 212 jobs are published; many more aren’t.

200,000 lbs
single-line pull on one AC electric winch
Heavy equipment recovery winch, 460 V 3Ø, 1,200 ft of 1-5/8" rope
See the job →
21,500 lbs
single-line lift on one hoist (43,000 lbs on 2-part line)
Fish ladder flow-control hoist
See the job →
Near zero – 660 FPM
line speeds built
Variable-frequency drives that creep to a near stop, up to a 660 FPM high-speed winch
See the job →
4,400 ft
of line on one drum
Aerostat launch-and-recovery winch (fiber-optic tether); 2,700 ft of 1/2" wire rope per drum on a construction hoist
See the job →
12 V DC – 600 V AC
50, 60 and 400 Hz, plus air and hydraulic
12 to 48 V DC · 100 to 600 V AC, single and three phase, 50 and 60 Hz · 400 Hz aircraft power · pneumatic · hydraulic · engine-driven
See the job →
Synchronized
multi-hoist and multi-winch systems
Two or more units driven as one so the load stays level: a routine part of what we build
See one →
Nationwide · worldwide
units shipped across the U.S. and abroad
Including Brazil, Canada, Chile, Djibouti, Iraq, Liechtenstein, Micronesia, Taiwan, Trinidad and Tobago, United Kingdom
All 212 jobs →
Since 1983
engineered and built to order in Beaverton, Oregon
Columbia winches and hoists, designed, machined, assembled and tested in our own shop
About APPI →

Pulling · positioning · tensioning

Custom winches

A custom winch usually starts from a standard Columbia base-mounted winch and changes what the job needs: drum, gearing, motor, controls, mounting or protection. When no platform fits, we design one from the drum out.

What we customize on a winch
What we customizeRange and options
Line pullStandard platforms 470 – 40,000 lbs single line (AC electric 500 – 40,000 lbs, pneumatic 470 – 40,000 lbs); more with multiple parts of line
DrumCustom drum sizes and grooving, strap drums, traction drives, freespool, multi-drum interlocks
Gearing & speedDrum, gear ratio and motor changed together to hit your pull and line speed; variable speed controls
Motor & powerAC 60 Hz 115 – 600 V, AC 50 Hz 220 – 400 V, pneumatic, 12 or 24 VDC, hydraulic; ½ – 60 HP across the range
ControlsLocal or remote, multiple control stations, load limiting and travel limiting devices
MountingUnusual or tight mounting, mounting brackets, self-contained systems, tractor packages
EnvironmentOutdoor, washdown, marine and hazardous (classified) locations
Wire rope3.5:1 design factor (ASME B30.7) or 2:1 (EN 14492-1 / general); 3/16" – 1-1/4" standard

Custom winches we’ve built

Lifting · lowering

Custom hoists

Custom hoists build on the Columbia base-mounted hoist range, AC electric and pneumatic, with the drum, brakes, motor, controls and mounting engineered for the lift.

What we customize on a hoist
What we customizeRange and options
LiftStandard platforms 500 – 64,000 lbs AC electric and 650 – 16,500 lbs pneumatic, single line; more with multiple parts of line
Drum & ropeCustom drum sizes and grooving; rope 3/16" – 1-1/4" standard, to 1-1/2" special on HU – HX
BrakesMultiple brakes, ratchet and pawls
Motor & powerAC 60 Hz 115 – 600 V, AC 50 Hz 220 – 400 V, pneumatic, 12 or 24 VDC, hydraulic; ½ – 60 HP across the range
ControlsVariable speed, synchronized multi-unit and multi-axis systems, multiple control stations, load and travel limiting
MountingBase-mounted on floor, wall or structure, trolley systems, davit and gantry cranes, mounting brackets
EnvironmentOutdoor, washdown, marine and hazardous (classified) locations
Wire rope5:1 design factor (ASME B30.16); ASME B30.7 compliant hoists available

Custom hoists we’ve built

Capability by platform

Most custom units start from a standard Columbia platform. Ratings are single-line, first-layer line pull of the standard models; custom units go beyond these by changing drums, gearing, motors and controls, so ask if your job falls outside them.

Standard Columbia capacity ranges by platform
PlatformMotionRated line pullSeries / notes
AC electric winchesPulling500 – 40,000 lbsWD, W2G, W2K, WN, WT, WR
Pneumatic winchesPulling470 – 40,000 lbsWD, W2G, W2K, WN, WR
AC electric hoistsLifting500 – 64,000 lbsHC, HD, H2G, H2K, HL, HU, HV, HW, HX
Pneumatic hoistsLifting650 – 16,500 lbsHD, H2G, H2K, HL, HS
CapstansPulling (soft line)1,000 – 10,000 lbsAC electric or pneumatic, to 74 FPM
Davit & gantry cranesLifting400 – 2,000 lbsReach to 81"; 1,000 lbs pallet gantry
DC electric winches & hoistsLifting & pullingAsk12 or 24 VDC
Hydraulic winches & hoistsLifting & pullingAskStandard lines plus custom Columbia units

Power

Power supplies we build for
SupplyStandardSpecial
AC, 60 Hz115 V 1Ø · 230 V 1Ø · 230 V 3Ø · 460 V 3Ø208 V 3Ø · 600 V 3Ø
AC, 50 Hz220 V 1Ø · 220 V 3Ø · 400 V 3Ø
PneumaticAir motors (capstans rated at 90 psi)
DC12 VDC · 24 VDC
HydraulicSized to your flow and pressure
ManualDavit and gantry crane hoists

Wire rope

Wire rope sizing
ItemRange
Standard rope sizes3/16" to 1-1/4"
Heavy hoists (HU–HX), specialto 1-1/2"
Hoist design factor5:1 (ASME B30.16)
Winch design factor3.5:1 (ASME B30.7) or 2:1 (EN 14492-1 / general)

Rope is sized against the design factor for the standard that applies to your job. For an ASME B30.7 base-mounted hoist, see B30.7 compliant hoists.

What we engineer for

Every custom unit is designed to its own requirements. Typical changes:

  • Unusual or tight mounting
  • Specific load capacities
  • Environmental adaptations: outdoor, washdown, marine, hazardous areas
  • Integration with your existing equipment and controls
  • Custom drum sizes and drum grooving
  • Traction drives
  • Freespool
  • Multi-drum interlocks
  • Multiple brakes
  • Variable speed controls
  • Local or remote controls; multiple control stations
  • Load limiting and travel limiting devices
  • Ratchet and pawls
  • Mounting brackets
  • Trolley systems

How it starts

  1. Your application. What the load is and how it moves.
  2. Your environment. Where it runs, the power on site and the space it has to fit.
  3. Your performance targets. Pull, speed, travel and duty cycle.
  4. We engineer and build it to order.

Free application evaluation →

What we customize, on real jobs

Each of these is a change we’ve made for a customer, with the job that shows it.

Drums & line storage

Drum length, barrel and flange sized to the line; custom grooving, twin anchors, multi-drum and strap drums. Up to 4,400 ft of tether on one drum.

Custom grooved drum on a 660 FPM winch →

Gearing & speed

Gear ratio, motor and drum changed together to hit the pull and the speed; variable-frequency drives for creep speeds and soft starts.

2.8 FPM variable-speed hoists for space-telescope testing →

Motors & power

AC 100–600 V at 50, 60 or 400 Hz (aircraft power); 12–48 V DC; air motors; hydraulic; self-contained diesel or propane power.

Four synchronized 380 V 50 Hz hoists for a wave basin →

Controls & monitoring

Pendants, radio remotes, joysticks and consoles; line speed, distance and line-tension readouts with programmable alarms and limits.

Joystick control with tension readouts and alarms →

Brakes, holding & position

Multiple brakes, ratchet and pawl for long holds, absolute encoders for remote position and load monitoring.

Ratchet and pawl plus absolute encoder →

Environment & enclosures

Outdoor, washdown, marine-duty and hazardous (classified) locations: stainless hardware, epoxy overcoat, heaters, explosion-proof motors and controls.

Marine-duty motors, stainless hardware, epoxy overcoat →

Mounting & frames

Floor, wall, overhead, trolley, davit and skid mounts; self-contained units with their own engine or power pack.

Self-contained diesel winch, 156 FPM, for barge spuds →

Spooling, load sensing & small packages

AutoAdvance line spoolers, integral load cells and compact DC units for tight spaces.

24 VDC recovery winch with load cell and AALS →

Documentation

Drawings, manuals and the paperwork regulated industries ask for, delivered with the unit.

Power-generation documentation package →

How a custom job runs

  1. Application evaluationTell us the load, how it moves, the space, the power and the environment. Free.
  2. EngineeringWe size the drum, gearing, motor, brakes, rope and controls, and send approval drawings when the job calls for them.
  3. Build in BeavertonMachined, assembled and wired in our Beaverton, Oregon shop, mostly from Columbia parts.
  4. TestRun tested before it ships, with your controls and options in place. Load testing is available.
  5. Ship and supportShipped with a manual and test report; parts and service from the people who built it.
Start a free application evaluationBrowse all custom jobs

Options & accessories

Columbia winches and hoists come in AC electric, DC electric and pneumatic power, with a wide range of capacities, drum sizes and gear ratios, and many modifications. These options fit standard and custom units.

U.S. Patent 5,649,729

One Line System (OLS)

The One Line System lets a single hoist line run a two-line bucket or grab. The load line works as either the hold line or the close line, so one winch with simple, quick-to-learn controls does the job of a two-line rig.

It fits most two-line buckets and grabs, small to large, and installs on mobile, marine or plant equipment that has one hoist. Systems are built from standard components for reliability and low maintenance. We supply complete systems for mobile, marine and industrial use, or retrofit your existing equipment.

  • Adapts to most two-line buckets and grabs
  • Intuitive controls
  • Patented system
  • Complete system or retrofit

Each one engineered for its own requirements.

  • Columbia custom AC electric hoist, 19,500 lbs
    AC electric hoist, 19,500 lbs
  • Columbia custom AC electric hoist
    AC electric hoist
  • Columbia custom AC electric hoist
    AC electric hoist
  • Columbia custom four-hoist system
    Four-hoist system
  • Columbia custom pneumatic hoist
    Pneumatic hoist
  • Columbia custom pneumatic capstan
    Pneumatic capstan
  • Columbia custom dc electric hoist
    Dc electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric winch
    Ac electric winch
  • Columbia custom ac electric traction drive
    Ac electric traction drive
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom pneumatic winch
    Pneumatic winch
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom hydraulic hoist
    Hydraulic hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric hoist
    Ac electric hoist
  • Columbia custom ac electric winch
    Ac electric winch
  • Columbia custom ac electric hoist
    Ac electric hoist

Built for this work: Solution Spotlight

Custom jobs we’ve engineered and built, written up in full.

All Solution Spotlight stories →

Industries we build for

Aerospace, manufacturing, construction, entertainment and many more.

What we need to quote

  • Load: weight being lifted or pulled
  • Speed you need (feet per minute)
  • Travel: how far, and rope length
  • Power available on site (voltage and phase, air, hydraulic)
  • Environment: indoor, outdoor, washdown, hazardous area
  • How often it runs (duty cycle)
  • Mounting and space limits
  • Photos or a sketch of the setup, if you have them

Custom winch & hoist questions

What does a custom winch or hoist cost, and how long does it take?

Every custom unit is quoted to its application, so there is no list price. Send the load, line speed, travel, power available, environment, duty cycle and mounting limits through an application evaluation or call (503) 626-0654. An engineer comes back with questions or a price range, and the lead time is confirmed with the quote.

Do you modify standard units or design from scratch?

Both. Most custom units start from a standard Columbia platform with a different drum, gear ratio, motor, controls or mounting, which is often less expensive and quicker than a fully custom design. When no platform fits, we engineer the unit from the drum out.

What capacities can you build?

Standard Columbia platforms run from 470 to 64,000 lbs single-line pull: winches to 40,000 lbs, AC electric hoists to 64,000 lbs and pneumatic hoists to 16,500 lbs. Multiple parts of line and multi-unit systems go higher.

What power options are available?

AC electric at 60 Hz (115, 230, 460 V standard; 208 and 600 V special) and 50 Hz (220 and 400 V), pneumatic, 12 or 24 VDC, and hydraulic sized to your flow and pressure.

Which standards do you design to?

Hoist wire rope is sized to a 5:1 design factor (ASME B30.16). Winch rope is sized to 3.5:1 (ASME B30.7) or 2:1 (EN 14492-1 / general), whichever applies to the job. We also build ASME B30.7 compliant hoists. Columbia products are never to be used to lift or move people, or to lift anything over people.

Where are your custom winches and hoists built?

Allied Power Products designs and builds the Columbia line in Beaverton, Oregon, and has since 1983.

Start with a free evaluation

Call (503) 626-0654 or send what you know. An engineer will come back with questions or a price range.

Request a quote