Columbia Pneumatic Hoist

H2K Series Pneumatic Hoists (to 6,000 lbs)

A compact, durable air hoist: up to 6,000 lbs on a single line and up to 76.1 FPM on a full drum, with a VM6 or VM8 vane motor. Add an AutoAdvance line spooler, hammerhead or manual overhead trolley, cable tensioner or pneumatic controls, or have it customized for the job.

Line pull
to 6,000 lbs
Line speed
to 76.1 FPM
Air supply
90 PSI · 110–160 SCFM
Motor
VM6 or VM8 vane
Columbia H2K Series pneumatic hoist

Standard Features

  • Rated for vertical lifting
  • Automatic, load-suspending brake
  • Totally enclosed geartrain
  • Three-stage planetary reduction
  • Installs at any angle
  • Dependable vane air motor

Available Options

Need electric power instead? See the AC electric H2K Series.

Performance

Intermittent duty. Each cell is line pull in lbs / line speed in FPM at the stated air pressure (PSI) and flow (SCFM). Ratio is the gear reduction.

ModelMotorPSISCFMRatioFirst layerMean drumFull drumQuote
VM69011036:1750 / 47.7578 / 61.9470 / 76.1Quote →
VM89016036:11,450 / 47.71,118 / 61.9910 / 76.1Quote →
VM690110321:16,000 / 5.44,627 / 6.93,675 / 8.5Quote →

Calculated performance, for reference only and subject to change. Confirm your selection with us before ordering.

Drum and wire rope capacity

DrumWeight · VM4Weight · VM6Weight · VM81/4" rope5/16" rope3/8" rope
-01105 lbs115 lbs120 lbs326 ft228 ft159 ft
-02110 lbs120 lbs125 lbs407 ft285 ft198 ft
-03120 lbs130 lbs135 lbs509 ft356 ft248 ft

Typical unit weight by motor. Rope capacity is full-drum length. -02 is the standard drum.

Replacing an HG or HF hoist?

The H2K is the recommended unit for new installations. We still support the earlier HG and HF Series with maintenance help, parts (when available) and technical guidance. HG Series legacy support → HF Series legacy support →

Winch & Hoist Selector

Size it in the Winch & Hoist Selector

Choose Pneumatic, then enter the load, line speed and travel. The selector shows layer-by-layer performance and the controls that fit.

Open the selector

Downloads & Engineering Resources

Fliers, manuals and parts breakdowns for the H2K Series. More in Resources.

Dimension drawings and 3D models for a specific model and drum are supplied on request: email info@alliedpower.com or contact us.

Parts or service for an installed unit? See Parts & Service and have the serial number ready.

Columbia pneumatic hoists at work

Jobs we've engineered and built with this series and its predecessors.

All Solution Spotlight stories →

Quote an H2K

Tell us the load, line speed, rope length and the air pressure and flow available.

Request a quote